Is the Amazon Kindle Paperwhite waterproof? Does it have an IP rating?

The Kindle Paperwhite is the best e-reader in the Kindle lineup, and for good reasons. It’s reasonably priced and is better than the barebones Kindle in almost all areas, featuring a sharper, brighter display, longer battery life, and a premium design. The newer Paperwhite 11th Gen has an even bigger display, and in some regards, it even beats the flagship Kindle Oasis, packing USB-C charging port and wireless charging support. But is the Kindle Paperwhite waterproof?

Is the Kindle Paperwhite waterproof?

The short answer is: yes, the Kindle Paperwhite is waterproof, with the term very loosely used here. The device has an IPX8 rating which makes it water-resistant. That means the Kindle Paperwhite can be safely used around water — if you understand the limitations. You can take it near a swimming pool, dunk it in a fish tank, and even wash it with tap water once in a while as part of your cleaning and maintenance routine. However, it’s also important to understand the limitation and caveats here. An IP rating doesn’t make a device immune to water, and the same is true for Kindle Paperwhite. Amazon notes that the Kindle Paperwhite can survive immersion in 2 meters deep water for up to 60 minutes and up to 0.25 meters of seawater for up to 3 minutes. However, it’s not recommended to immerse the device in salt water, soapy water, or other corrosive liquids.

Amazon Kindle Paperwhite 11th Gen

The new Kindle Paperwhite 11th Gen has a large 6.8-inch E Ink display, up to ten weeks of battery life and IPX8 water resistance.

Buy from Amazon

If your Kindle Paperwhite gets wet or is immersed in water, let it fully dry before attempting to charge it. Don’t use an external heat source to dry the device. Instead, let the device dry by standing it upright and keeping it in a well-ventilated area. You should also not expose the Kindle Paperwhite to pressurized water, high-velocity water, or extremely humid conditions.

And while the Kindle Paperwhite is water-resistant, it doesn’t have any protection against dust. But this isn’t a big deal and something that can be solved by putting on a folio case. Check out the best cases for the Kindle Paperwhite. And note that not all Kindle Paperwhite models are water-resistant. Only the Paperwhite 9th Gen, 10th, Gen, and 11th Gen models have an IPX8 rating.

Bottom line

So yes, the Kindle Paperwhite is water-resistant and can withstand water splash or a short immersion in fresh water. However, you should avoid exposing the device to saltwater and other corrosive liquids.

The post Is the Amazon Kindle Paperwhite waterproof? Does it have an IP rating? appeared first on XDA.

from XDA https://ift.tt/lsmUApa
via IFTTT

Netflix rolls out spatial audio support for select original shows and movies

After rolling out Spatial Audio support for the iPhone and iPad in August last year, Netflix is now making the feature available to more users. The streaming giant has partnered with Sennheiser to convert surround sound mixes into a spatial audio representation, which can now be played through any stereo speaker or headphone.

According to Netflix, the new spatial audio capabilities don’t require any specialized equipment. However, it’s only available for select Netflix original TV shows and movies at the moment. If you’re a Netflix subscriber, you can now search for “spatial audio” on the platform to find all the supported titles. Currently supported titles include the fourth season of the popular sci-fi drama Stranger Things, Red Notice, and The Witcher.

In its announcement, Netflix mentioned that the new spatial audio feature “helps to translate the cinematic experience of immersive audio to any stereo, so the work creators do to bring you into the story happens no matter what device you use to watch Netflix.” The feature is available on all Netflix subscription plans across all regions.

Netflix’s new spatial audio feature utilizes Sennheiser’s AMBEO 2-Channel Spatial Audio technology. Sennheiser notes that AMBEO 2-Channel Spatial audio “is not another mix. Instead, it is created from open, industry-standard deliverables, like ADM or IAB files. The renderer easily fits into standard encoding pipelines. It outputs a standard two-channel audio file that can be delivered as a drop-in replacement for stereo.”

Note that Netflix’s spatial audio feature does not offer the head-tracking capabilities that you get with spatial audio on the Apple AirPods Pro. In addition, those who use a multi-channel surround sound setup while watching Netflix might not notice any significant improvements with the new feature.

Have you tried Netflix’s new spatial audio feature? Did you notice any significant improvements? Let us know in the comments section below.

---

Source: Netflix, Sennheiser

The post Netflix rolls out spatial audio support for select original shows and movies appeared first on XDA.

from XDA https://ift.tt/TXy8DxY
via IFTTT

Pixel’s At a Glance widget will soon let you track your cab bookings and food deliveries

Back in April, a teardown of the Google app revealed that the At a Glance widget on Pixel devices might soon get support for grocery delivery tracking. Now, Mishaal Rahman has spotted three more features that might soon show up in the At a Glance widget — cross-device timer info, ridesharing service status, and food delivery arrival status.

In a recent tweet, Rahman shared a screenshot of the upcoming features and revealed some details about the supported services. As you can see in the attached screenshot, the At a Glance settings include three additional toggles, namely Cross device timer, Ridesharing service, and Food delivery. While these features are not live at the moment, they could make their way to users with an upcoming update for the Google app.

Credit: Mishaal Rahman

Once the features roll out, the Cross device timer feature will let users view timer info from all devices connected to their Google account in the At a Glance widget. In addition, users will be able to track their Uber and Lyft cab bookings in the widget, along with Doordash delivery statuses. Google might add support for more ridesharing and food delivery services in time for the rollout, but we don’t have any information regarding the same at the moment.

Uber & Lyft for supported ridesharing sources.

Doordash for supported food delivery sources.

— Mishaal Rahman (@MishaalRahman) July 7, 2022

The At a Glance widget on Pixel devices has received several useful features over the last few months. The widget received support for the battery and connection status for Bluetooth devices with the March 2022 Pixel Feature Drop. It previously received Nest doorbell alerts, fitness app activity, a flashlight reminder, a safety check countdown from the Personal Safety app, and bedtime alerts from the Clock app.

What do you think of these new features for the Pixel At a Glance widget? Let us know in the comments section below.

The post Pixel’s At a Glance widget will soon let you track your cab bookings and food deliveries appeared first on XDA.

from XDA https://ift.tt/UGinC7B
via IFTTT

Tasker’s beginner-friendly Tasky interface is now available for all users

Tasker developer João Dias debuted a new beginner-friendly interface, called Tasky, with Tasker 6.0 beta in March this year. Designed to help new users get a grip of the powerful automation app, the Tasky interface offers hundreds of pre-built “routines” that you can use without going through a complex setup process. After a successful beta run, the new Tasky interface is now available for all users with Tasker 6.0.9.

Tasker 6.0.9 has started rolling out through the Play Store, and it brings the new Tasky interface to the stable channel. The beginner-friendly interface makes automation configurable by giving users access to pre-built routines that they can customize as per their needs. The pre-built routines range from simple “flip to shhh” options to more complex automatic parking notifications, and we’re sure you’ll find something to kickstart your automation journey with Tasker.

If you like the idea and want to give it a shot, you can check out the video embedded above to see how you can import and configure a routine. In case you’re a seasoned Tasker user and you’d like to share your Tasker projects to help new users, check out the following video to learn how to make your Tasker projects configurable on import.

Along with Tasky, Tasker 6.0.9 brings a couple of other noteworthy changes. These include several new actions like Get Screen Info, Airplane Mode without Root or ADB WiFi, support for Quick Setting Tile Actions on locked devices, and more. You can check out the full Tasker 6.0.9 changelog here.

Tasker ($3.49, Google Play) →

---

Source: Reddit

The post Tasker’s beginner-friendly Tasky interface is now available for all users appeared first on XDA.

from XDA https://ift.tt/3dytFwx
via IFTTT

One UI 4.1 update arrives on the Samsung Galaxy A22 5G and three other phones

Samsung is bringing Android 12 with One UI 4.1 to four more A-series smartphones this week, growing its portfolio of handsets that feature the latest version of Android. The devices being updated are the Galaxy A22 5G, Galaxy A21s, Galaxy A03s, and the Galaxy A02s.

Galaxy A22 5G

The 4G edition of the Galaxy A22 picked up the Android 12 update back in May. Now, the Galaxy A22 5G is receiving a taste of Android 12 with One UI Core 4.1 in the form of software version A226BXXU4BVF7. So far, it’s the SM-A226B variant to which the new build has started rolling out in Thailand and Malaysia.

Samsung Galaxy A22 5G XDA Forums

Galaxy A21s

It appears the Android 12 update for the Galaxy A21s is only available in Russia, Taiwan, and Hong Kong at the moment, but it should roll out to additional markets in the coming days. The latest firmware version is identified as A217FZHU8DVF6, which is meant for the SM-A217F model.

Samsung Galaxy A21s XDA Forums

Galaxy A03s and Galaxy A02s

The same update of Android 12 with One UI Core 4.1 is also rolling out to the Galaxy A03s (model number SM-A037F) and Galaxy A02s (model number SM-A025F, SM-A025M) in select regions. For the Galaxy A03s, the software version is A037FXXU1BVFB and it is available across several Asian countries. The Galaxy A02s, on the other hand, has received the new build in the form of build A025FXXU4CVF4 in Russia and A025MUBU4CVF4 in Panama.

Samsung Galaxy A02s XDA Forums

All of the updated firmware releases include the June 2022 security patch, according to the release notes. Notably, the aforementioned devices skipped One UI 4.0 and jumped directly to 4.1.

As always, the updates are rolling out in batches. Having said that, if you are no stranger to PC-based flashing, you can skip the waiting queue. To do so, grab the latest release directly from the company’s Firmware Update Server (FUS) and flash it manually on your Galaxy device.

---

Source: Samsung Update Server (1, 2, 3, 4, 5)

The post One UI 4.1 update arrives on the Samsung Galaxy A22 5G and three other phones appeared first on XDA.

from XDA https://ift.tt/xV6KOLw
via IFTTT

NewPipe 0.23.1 rolls out with playback improvements and several bug fixes

The developers behind the NewPipe open-source YouTube client have released a new update for the app. The latest release (v0.23.1) brings playback improvements thanks to DASH support, along with several bug fixes. In a blog post regarding the update, the team reveals that the DASH support should result in the app feeling a whole lot faster. Following the update, videos should load faster, and you should see a noticeable performance improvement while seeking through videos.

Along with DASH support, NewPipe 0.23.1 fixes repeated buffering while playing YouTube videos, lets users view recently ended YouTube livestreams, and introduces support for more  resolutions and formats. Check out the section below for a list of all the significant changes in the latest release.

NewPipe 0.23.1 changes and bug fixes

• Now DASH is used as the preferred means for YouTube playback instead of progressive HTTP, improving loading times in playback and seeking. This has made the app faster by an order of magnitude! No more waiting after tapping on a YouTube video!
• According to some users, repeated buffering while playing YouTube videos also seems to have become an issue of the past.
• Recently ended YouTube livestreams are now fully playable, right from the beginning.
• In YouTube, some more resolutions and formats are now available for playing.
• Fixed seeking on PeerTube videos with only HLS streams (that is, most PeerTube videos). Now PeerTube is finally usable!
• Fixed crash on PeerTube videos with an audio-only stream.
• Fixed playback of SoundCloud HLS-only tracks.

The blog post further adds that the team won’t release a new build of NewPipeExtracter along with the latest update, even though most of the changes mentioned above were made to the NewPipeExtractor. Furthermore, it notes that following the update users should be able to convert a remote playlist into a local NewPipe playlist. The release also brings a few more improvements and bug fixes, and you can learn all about them by clicking on the source link below.

NewPipe is one of the best YouTube Vanced alternatives out there. If you haven’t checked it out already, you can download it from the project’s GitHub page.

---

Source: NewPipe

The post NewPipe 0.23.1 rolls out with playback improvements and several bug fixes appeared first on XDA.

from XDA https://ift.tt/dqEUJMs
via IFTTT

Windows Terminal 1.15 Preview adds keyboard text selection and scroll marks

Microsoft has updated the preview version of Windows Terminal to version 1.15, bringing along a couple of significant improvements to the user experience. First off, there’s now the ability to use mark mode to select text using the keyboard.

By pressing Ctrl + Shift + M, users can enter mark mode, and once it’s enabled, you can hold Shift while pressing the arrow keys to select text. You can also press Ctrl + A to select all the text in the Terminal’s buffer. It’s a seemingly small improvement, but if you’re used to selecting text with the keyboard in other apps, it can be very beneficial.

In addition to this, Windows Terminal Preview 1.15 adds experimental support for scroll marks, so you can more easily find something specific in your terminal history. Scroll marks can be navigated using terminal actions to jump directly to a specific mark, or you can also enable the ability to see scroll marks on the scroll bar so you can manually search for the text you want. As mentioned, this feature is still experimental and Microsoft warns that it’s subject to changes, but it’s certainly another welcome addition for those that heavily use the Windows Terminal.

This release also comes with a few smaller improvements, including support for the DECPS escape sequence, which allows users to play sounds through the terminal, plus new keyboard accelerators for the Windows Terminal’s shell extension, so you can use keyboard shortcuts to open files or folders in Terminal, Terminal Preview, or Terminal (Dev).

Alongside the Windows Terminal Preview 1.15 release, Microsoft has also made the previous preview version, 1.14, available in the stable channel. This version includes the ability to set a single background image for Terminal layouts with multiple panes, spreading the image across the panes. It also packs some visual changes to various elements of the UI, including tabs, the scrollbar, and more to bring it more in line with the Windows 11 design language.

You can update Windows Terminal Preview through the Microsoft Store, or download it using the link below if you’re interested. You can also install the stable channel of Windows Terminal, though it should be pre-installed on Windows 11.

Windows Terminal (Free, Microsoft Store) →

Windows Terminal Preview (Free, Microsoft Store) →

---

Source: Microsoft

The post Windows Terminal 1.15 Preview adds keyboard text selection and scroll marks appeared first on XDA.

from XDA https://ift.tt/tyvCZsS
via IFTTT